PAUSE
ENCORE
BOX
LESSON REVIEW
QPR1
1. A device that sends data rather slowly, one bit at a time,
as on a terminal, is called a ___________ device.
QPR2
2. Parallel devices must be connected to ___________ ports.
QPR3
3. After you connect a new terminal to a free port, you must
modify the terminal initialization file /etc/_________ .
QPR4
4. Enter the command to set the terminal port /dev/tty17
to operate at 9600 baud with the echoing of erase characters.
QPR5
5. Before using any terminal, you must set the terminal type.
When you do this, the system looks into a database of control
codes for various types of terminals. This database is in the
______________ file.
QPR6
6. Under the Bourne Shell, setting the terminal type is a two
step process. To set the terminal type to AT386, the first
step is to enter TERM=AT386. Enter the command to accomplish
the second step. (You can assume that your database contains
the correct information for an AT386.)
QPR7
7. Enter the command to set the terminal type to AT386 in the
C Shell. (Again, you can assume that your database contains
the correct information for an AT386.)
QPR8
8. The init program invokes /etc/getty which activates
the terminal after looking in the ______________ file for
things like the erase, newline, and kill characters.
QPR9
9. If you wish to activate or deactivate a terminal after
altering the /etc/inittab file, you can issue a HANGUP signal.
Enter the appropriate kill command to do so.
9. If you wish to activate or deactivate a terminal after
altering the /etc/ttys file, you can issue a HANGUP signal.
Enter the appropriate kill command to do so.
9. If you wish to activate or deactivate a terminal after
altering the /etc/ttys file, you can issue a HANGUP signal.
Enter the appropriate kill command to do so.
QPR10
10. The /usr/lib/lpadmin program will enable you to
a add a new serial printer
b add a new parallel printer
c modify the printer configuration and interface program
d a and b
e b and c
f a and c
g a, b, and c
10. Once you have connected a new serial printer and edited
the /etc/printcap file, you need to create a subdirectory
for the new printer in the /usr/__________ directory.
QPR11
11. Enter the command that will activate a printer
with destination pr2, device name /dev/lp2 and
interface model lplaser.
11. Enter the command that will send the file draft
to the printer called laser.
QPR12
12. After configuring the printer with the lpadmin command,
you would enable the newly configured printer with enable pr2.
Then you would issue the command _________ pr2 to arrange for
pr2 to accept the print requests.
12. The output of the lpq command lists your print
request with job number 55. Enter the command
that will remove that job from the queue.
QPR13
13. The command to activate the printer daemon is
/usr/lib/___________.
QPR14
14. The command to disable the printer daemon is
/usr/lib_________ .
RINTER
______________________________________________________________________________
$PRMT_STR$
That is correct!
You've got it on the 2nd try.
Good, you understand the concept.
$F_DIAG_L1$
$F_DIAG_L2$
$F_DIAG_L3$
$S_DIAG_L1$
$S_DIAG_L2$
$S_DIAG_L3$
$REV_STR1$
$REV_STR2$
FORGET1
The correct answer is: $ANSWER$
GO